The Panasonic washing machine shows error codes on the display - what each of them means and how to eliminate them will be discussed in this article. Thanks to self-diagnosis of SMA, you can quickly find the problem and solve the problem without calling the wizard.
Let's see what malfunctions are inherent in the Panasonic washing machine.
Panasonic SMA fault codes: meaning, causes, solutions
Error Codes | Value | Reasons for the appearance | How to fix the problem |
U11 | What does the code U11 mean: the washing process cannot be completed. | If the CM gives an error U11, then:
| How to fix the malfunction:
|
U12 U13 H04 | Error or program crash. | When these error codes are lit on the board, the control module is faulty. | What to do to reset the error:
|
U14 | Mains voltage is not OK. | Violation in the mains. | It is better to consult a specialist. |
U18 | Sensor signal error. | The code U18 was displayed on the screen - a malfunction of the control unit occurred. | To remove the error, you need to repair or replace the main unit. |
H01 H05 H09 | The control board failed. | The main board is defective. | Installing a new board. |
H07 H17 | Some sensors do not work correctly. | Sensor malfunction. | Change of faulty sensors. |
H21 | Error operation modes. | The processor is out of order. | You need to reflash the processor. |
H27 H53 | CM does not start the wash. | If the Panasonic washing machine does not start, the following problems may occur:
| How to solve a problem:
|
H29 H41 | Faulty control board and sensors in the washer. | Board contacts burned out, or its elements are broken. | Installation of serviceable parts. Repair electronic circuit board. |
H43 H46 H51 H55 | Critical situation. | You must contact the service center. | |
H52 | Failure of the electronic controller. | Replacing the controller with a working one. |
Having familiarized yourself with the codes and their solutions in the error table, you can fix the breakdown yourself. In case of critical faults, it is better to contact the service.